fprintf

printf, fprintf, sprintf, snprintf, printf_s, fprintf_s

在头文件中定义
	(1)
int printf（const char * format，...）;	（直到C99）
int printf（const char * restrict format，...）;	（自C99以来）
	(2)
int fprintf（FILE * stream，const char * format，...）;	（直到C99）
int fprintf（FILE * restrict stream，const char * restrict format，...）;	（自C99以来）
	(3)
int sprintf（char * buffer，const char * format，...）;	（直到C99）
int sprintf（char * restrict buffer，const char * restrict format，...）;	（自C99以来）
int snprintf（char 限制缓冲区，int bufsz，const char 限制格式，...）;	(4)	（自C99以来）
int printf_s（const char * restrict format，...）;	(5)	（自C11以来）
int fprintf_s（FILE * restrict stream，const char * restrict format，...）;	(6)	（自C11以来）
int sprintf_s（char * restrict buffer，rsize_t bufsz，const char * restrict format，...）;	(7)	（自C11以来）
int snprintf_s（char * restrict buffer，rsize_t bufsz，const char * restrict format，...）;	(8)	（自C11以来）

从给定的位置加载数据，将它们转换为字符串等价物并将结果写入各种接收器。

1）将结果写入输出流stdout。

2）将结果写入输出流stream。

3）将结果写入字符串buffer。如果要写入的字符串（加上终止的空字符）超过了指向的数组的大小，则行为未定义buffer。

4）将结果写入字符串buffer。最多bufsz- 写入1个字符。结果字符串将以空字符结尾，除非bufsz为零。如果bufsz为零，则不会写入任何内容，并且buffer可能是空指针，但返回值（将写入的字节数）仍然会计算并返回。

5-8）与（1-4）相同，只是在运行时检测到以下错误并调用当前安装的约束处理函数：

转换说明符%n存在于format

由于所有的边界检查功能，printf_s，fprintf_s，sprintf_s，和snrintf_s仅保证可供如果__STDC_LIB_EXT1__由实现所定义，并且如果用户定义__STDC_WANT_LIB_EXT1__的整数常数1，包括之前<stdio.h>。

参数

流	-	输出文件流写入
缓冲	-	指向要写入的字符串的指针
bufsz	-	最多bufsz - 可能会写入1个字符，再加上空终止符
格式	-	pointer to a null-terminated multibyte string specifying how to interpret the data. The format string consists of ordinary multibyte characters (except %), which are copied unchanged into the output stream, and conversion specifications. Each conversion specification has the following format: introductory % character (optional) one or more flags that modify the behavior of the conversion: -: the result of the conversion is left-justified within the field (by default it is right-justified) +: the sign of signed conversions is always prepended to the result of the conversion (by default the result is preceded by minus only when it is negative) space: if the result of a signed conversion does not start with a sign character, or is empty, space is prepended to the result. It is ignored if + flag is present. # : alternative form of the conversion is performed. See the table below for exact effects otherwise the behavior is undefined. 0 : for integer and floating point number conversions, leading zeros are used to pad the field instead of space characters. For integer numbers it is ignored if the precision is explicitly specified. For other conversions using this flag results in undefined behavior. It is ignored if - flag is present. (optional) integer value or * that specifies minimum field width. The result is padded with space characters (by default), if required, on the left when right-justified, or on the right if left-justified. In the case when * is used, the width is specified by an additional argument of type int. If the value of the argument is negative, it results with the - flag specified and positive field width. (Note: This is the minimum width: The value is never truncated.) (optional) . followed by integer number or , or neither that specifies precision of the conversion. In the case when is used, the precision is specified by an additional argument of type int. If the value of this argument is negative, it is ignored. If neither a number nor * is used, the precision is taken as zero. See the table below for exact effects of precision. (optional) length modifier that specifies the size of the argument conversion format specifier The following format specifiers are available: Conversion specifier Explanation Argument type length modifier hh (C99). h (none) l ll (C99). j (C99). z (C99). t (C99). L % writes literal %. The full conversion specification must be %%. N/A N/A N/A N/A N/A N/A N/A N/A N/A c writes a single character. The argument is first converted to unsigned char. If the l modifier is used, the argument is first converted to a character string as if by %ls with a wchar_t2 argument. N/A N/A int wint_t N/A N/A N/A N/A N/A s writes a character string The argument must be a pointer to the initial element of an array of characters. Precision specifies the maximum number of bytes to be written. If Precision is not specified, writes every byte up to and not including the first null terminator. If the l specifier is used, the argument must be a pointer to the initial element of an array of wchar_t, which is converted to char array as if by a call to wcrtomb with zero-initialized conversion state. N/A N/A char* wchar_t* N/A N/A N/A N/A N/A d i converts a signed integer into decimal representation -dddd. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters. signed char short int long long long intmax_t signed size_t ptrdiff_t N/A o converts a unsigned integer into octal representation oooo. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters. In the alternative implementation precision is increased if necessary, to write one leading zero. In that case if both the converted value and the precision are 0, single 0 is written. unsigned char unsigned short unsigned int unsigned long unsigned long long uintmax_t size_t unsigned version of ptrdiff_t N/A x X converts an unsigned integer into hexadecimal representation hhhh. For the x conversion letters abcdef are used. For the X conversion letters ABCDEF are used. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters. In the alternative implementation 0x or 0X is prefixed to results if the converted value is nonzero. N/A u converts an unsigned integer into decimal representation dddd. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters. N/A f F converts floating-point number to the decimal notation in the style -ddd.ddd. Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is 6. In the alternative implementation decimal point character is written even if no digits follow it. For infinity and not-a-number conversion style see notes. N/A N/A double double (C99) N/A N/A N/A N/A long double e E converts floating-point number to the decimal exponent notation. For the e conversion style -d.ddde±dd is used. For the E conversion style -d.dddE±dd is used. The exponent contains at least two digits, more digits are used only if necessary. If the value is 0, the exponent is also 0. Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is 6. In the alternative implementation decimal point character is written even if no digits follow it. For infinity and not-a-number conversion style see notes. N/A N/A N/A N/A N/A N/A a A (C99). converts floating-point number to the hexadecimal exponent notation. For the a conversion style -0xh.hhhp±d is used. For the A conversion style -0Xh.hhhP±d is used. The first hexadecimal digit is 0 if the argument is not a normalized floating point value. If the value is 0, the exponent is also 0. Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is sufficient for exact representation of the value. In the alternative implementation decimal point character is written even if no digits follow it. For infinity and not-a-number conversion style see notes. N/A N/A N/A N/A N/A N/A g G converts floating-point number to decimal or decimal exponent notation depending on the value and the precision. For the g conversion style conversion with style e or f will be performed. For the G conversion style conversion with style E or F will be performed. Let P equal the precision if nonzero, 6 if the precision is not specified, or 1 if the precision is 0. Then, if a conversion with style E would have an exponent of X: if P > X ≥ −4, the conversion is with style f or F and precision P − 1 − X. otherwise, the conversion is with style e or E and precision P − 1. Unless alternative representation is requested the trailing zeros are removed, also the decimal point character is removed if no fractional part is left. For infinity and not-a-number conversion style see notes. N/A N/A N/A N/A N/A N/A n returns the number of characters written so far by this call to the function. The result is written to the value pointed to by the argument. The specification may not contain any flag, field width, or precision. signed char* short* int* long* long long* intmax_t* signed size_t* ptrdiff_t* N/A p writes an implementation defined character sequence defining a pointer. N/A N/A void* N/A N/A N/A N/A N/A N/A The floating point conversion functions convert infinity to inf or infinity. Which one is used is implementation defined. Not-a-number is converted to nan or nan(char_sequence). Which one is used is implementation defined. The conversions F, E, G, A output INF, INFINITY, NAN instead. Even though %c expects int argument, it is safe to pass a char because of the integer promotion that takes place when a variadic function is called. The correct conversion specifications for the fixed-width character types (int8_t, etc) are defined in the header <inttypes.h> (although PRIdMAX, PRIuMAX, etc is synonymous with %jd, %ju, etc). The memory-writing conversion specifier %n is a common target of security exploits where format strings depend on user input and is not supported by the bounds-checked printf_s family of functions. There is a sequence point after the action of each conversion specifier; this permits storing multiple %n results in the same variable or, as an edge case, printing a string modified by an earlier %n within the same call. If a conversion specification is invalid, the behavior is undefined.
Conversion specifier	Explanation	Argument type
length modifier	hh (C99).	h
%	writes literal %. The full conversion specification must be %%.	N/A
c	writes a single character. The argument is first converted to unsigned char. If the l modifier is used, the argument is first converted to a character string as if by %ls with a wchar_t2 argument.	N/A
s	writes a character string The argument must be a pointer to the initial element of an array of characters. Precision specifies the maximum number of bytes to be written. If Precision is not specified, writes every byte up to and not including the first null terminator. If the l specifier is used, the argument must be a pointer to the initial element of an array of wchar_t, which is converted to char array as if by a call to wcrtomb with zero-initialized conversion state.	N/A
d i	converts a signed integer into decimal representation -dddd. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters.	signed char
o	converts a unsigned integer into octal representation oooo. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters. In the alternative implementation precision is increased if necessary, to write one leading zero. In that case if both the converted value and the precision are 0, single 0 is written.	unsigned char
x X	converts an unsigned integer into hexadecimal representation hhhh. For the x conversion letters abcdef are used. For the X conversion letters ABCDEF are used. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters. In the alternative implementation 0x or 0X is prefixed to results if the converted value is nonzero.	N/A
u	converts an unsigned integer into decimal representation dddd. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters.	N/A
f F	converts floating-point number to the decimal notation in the style -ddd.ddd. Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is 6. In the alternative implementation decimal point character is written even if no digits follow it. For infinity and not-a-number conversion style see notes.	N/A
e E	converts floating-point number to the decimal exponent notation. For the e conversion style -d.ddde±dd is used. For the E conversion style -d.dddE±dd is used. The exponent contains at least two digits, more digits are used only if necessary. If the value is 0, the exponent is also 0. Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is 6. In the alternative implementation decimal point character is written even if no digits follow it. For infinity and not-a-number conversion style see notes.	N/A
a A (C99).	converts floating-point number to the hexadecimal exponent notation. For the a conversion style -0xh.hhhp±d is used. For the A conversion style -0Xh.hhhP±d is used. The first hexadecimal digit is 0 if the argument is not a normalized floating point value. If the value is 0, the exponent is also 0. Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is sufficient for exact representation of the value. In the alternative implementation decimal point character is written even if no digits follow it. For infinity and not-a-number conversion style see notes.	N/A
g G	converts floating-point number to decimal or decimal exponent notation depending on the value and the precision. For the g conversion style conversion with style e or f will be performed. For the G conversion style conversion with style E or F will be performed. Let P equal the precision if nonzero, 6 if the precision is not specified, or 1 if the precision is 0. Then, if a conversion with style E would have an exponent of X: if P > X ≥ −4, the conversion is with style f or F and precision P − 1 − X. otherwise, the conversion is with style e or E and precision P − 1. Unless alternative representation is requested the trailing zeros are removed, also the decimal point character is removed if no fractional part is left. For infinity and not-a-number conversion style see notes.	N/A
n	将此调用到目前为止写入的字符数返回给该函数。结果写入参数指向的值。规范可能不包含任何标志，字段宽度或精度。	签名字符*
p	写一个实现定义的字符序列来定义一个指针。	N / A
...	-	指定要打印的数据的参数

介绍%人物

以下格式说明符可用：

Conversion

说明符说明参数类型长度修饰符 hh（C99）。

h (none) l ll (C99).

j (C99).

z (C99).

t (C99).

L % 写文字%。完整的转换规范必须是%%。N / AN / AN / AN / AN / AN / AN / AN / AN / A c 写入单个字符。该论点首先转换为unsigned char。如果使用了l修饰符，则首先将参数转换为字符串，就像通过具有参数的％ls一样wchar_t[2]。

N/A N/A int

wint_t

N / AN / AN / AN / AN / A s 写入字符串参数必须是指向字符数组的初始元素的指针。Precision指定要写入的最大字节数。如果未指定Precision，则将每个字节写入并不包括第一个空终止符。如果使用了l说明符，则参数必须是指向数组初始元素的指针wchar_t，它将转换为char数组，就像通过调用wcrtomb具有零初始化转换状态一样。

N/A N/A char*

wchar_t*

N/A N/A N/A N/A N/A d

i 将有符号的整数转换为十进制表示形式-dddd。 精度指定出现的最小位数。默认的精度是1。

如果转换后的值和精度都是0没有字符的转换结果。

signed char

short

int

long

long long

intmax_t

signed size_t

ptrdiff_t

N / A o 将无符号整数转换为八进制表示oooo。 精度指定出现的最小位数。默认的精度是1。如果转换后的值和精度都是0没有字符的转换结果。在替代实现中，如果需要，可以增加精度以写入一个前导零。在这种情况下，如果转换值和精度都是0，0写入单个。

unsigned char

unsigned short

unsigned int

unsigned long

unsigned long long

uintmax_t

size_t

未签名的版本 ptrdiff_t

N/A x

X 将无符号整数转换为十六进制表示hhhh。使用x转换字母abcdef。

使用X转换字母ABCDEF。

精度指定出现的最小位数。默认的精度是1。如果转换后的值和精度都是0没有字符的转换结果。在替代实现中， 0x或者0X如果转换后的值不为零，则将其作为结果的前缀。

N / A u 将无符号整数转换为十进制表示形式dddd。 精度指定出现的最小位数。默认的精度是1。如果转换后的值和精度都是0没有字符的转换结果。

N/A f

F 将浮点数转换为样式-ddd.ddd中的小数表示法。 精度指定小数点后面出现的最小位数。默认的精度是6。在替代实现中，即使没有数字跟随，小数点字符也会被写入。对于无穷大和非数字转换风格，请参阅注释。

N/A N/A double

`double` (C99)

N/A N/A N/A N/A long double

`e`

E 将浮点数转换为十进制指数符号。对于e转换样式，使用-d.ddd e±dd。

对于E转换样式，使用-d.ddd E±dd。

指数至少包含两位数字，只有在必要时才使用更多数字。如果值是0，指数也是0。精度指定小数点后面出现的最小位数。默认的精度是6。在替代实现中，即使没有数字跟随，小数点字符也会被写入。对于无穷大和非数字转换风格，请参阅注释。

N/A N/A N/A N/A N/A N/A a

A (C99).

将浮点数转换为十六进制指数表示法。对于a转换样式- 使用0xh.hhh p±d。

对于A转换样式- 使用0Xh.hhh P±d。

0如果参数不是标准化的浮点值，则第一个十六进制数字是。如果值是0，指数也是0。精度指定小数点后面出现的最小位数。默认精度足以精确表示值。在替代实现中，即使没有数字跟随，小数点字符也会被写入。对于无穷大和非数字转换风格，请参阅注释。

N/A N/A N/A N/A N/A N/A g

G根据值和精度 将浮点数转换为十进制或十进制指数符号。对于风格转换的转换与风格或将被执行。gef

对于G风格转换的转换与风格E或F将被执行。

让P等于精度如果非零，6如果没有指定精度，或者1如果精度是0。然后，如果具有样式的转换E将具有以下指数X：

如果P> X≥-4，转换是用式f或F和精度P - 1 - X。

除非请求替代表示，否则尾随零将被删除，如果没有剩余小数部分，小数点字符也会被删除。对于无穷大和非数字转换风格，请参阅注释。

不适用/不适用/不适用/不适用/ n 返回此函数迄今为止写入的字符数。结果写入参数指向的值。规范可能不包含任何标志，字段宽度或精度。

signed char*

short*

int*

long*

long long*

intmax_t*

签 size_t*

ptrdiff_t*

N / A p 写入一个实现定义的字符序列来定义一个指针。不适用不适用不适用不适用不适用不适用 void* 浮点转换函数将无穷大转换为inf或infinity。使用哪一个是实现定义的。

非数字转换为nan或。使用哪一个是实现定义的。nan(char_sequence)

该转换F，E，G，A输出INF，INFINITY，NAN来代替。

即使%c需要int参数，通过char调用可变参数函数时发生的整数提升也是安全的。

对于固定宽度的字符类型（正确的转换规格int8_t<inttypes.h>还（虽然，等等）都在头定义PRIdMAX，PRIuMAX等是同义词%jd，%ju等）。

内存写入转换说明符%n是安全漏洞的常见目标，其中格式字符串取决于用户输入，并且不受边界检查printf_s函数族的支持。

每个转换说明符的操作之后都有一个序列点; 这允许将多个%n结果存储在相同的变量中，或者作为边缘情况，%n在同一个调用中打印由较早修改的字符串。

如果转换规范无效，则行为未定义。

 ...   -   arguments specifying data to print

返回值

1,2）发送到输出流的字符数或负值（如果发生输出错误或编码错误（用于字符串和字符转换说明符））

3）写入的字符数buffer（不包括终止空字符）;如果发生编码错误（用于字符串和字符转换说明符），则返回负值

4）buffer如果bufsz被忽略，将被写入的字符数（不包括终止空字符），或者如果编码错误（对于字符串和字符转换说明符）发生，则为负值

5,6）传输到输出流的字符数或负值（如果发生输出错误，运行时间约束违规错误或编码错误）。

7）写入的字符数buffer，不包括空字符（只要buffer不是空指针，bufsz并且不为零且不大于RSIZE_MAX），则不计入空字符，或者在运行时约束违规时为零，编码错误为负值

8）不包括终止空字符的字符数（只要buffer不是空指针并且bufsz不为零且不大于RSIZE_MAX），buffer如果bufsz被忽略，将被写入的字符数或者如果运行时约束违规或编码错误发生

注意

C标准和POSIX指定sprintf当参数与目标缓冲区重叠时，其行为及其变体未定义。例：

sprintf(dst, "%s and %s", dst, t // <- broken: undefined behavior

POSIX指定该errno设置上的错误。它还指定了额外的转换规范，最显着的是支持参数重新排序（n$紧接在%指示n'th参数之后）。

snprintf使用零bufsz和空指针调用buffer对于确定包含输出所需的缓冲区大小很有用：

const char *fmt = "sqrt(2) = %f";
int sz = snprintf(NULL, 0, fmt, sqrt(2)
char buf[sz + 1]; // note +1 for terminating null byte
snprintf(buf, sizeof buf, fmt, sqrt(2)

snprintf_s，就像snprintf，但不像sprintf_s，会截断输出以适应bufsz-1。

例

#include <stdio.h>
 
int main(void)
{
    printf("Strings:\n"
    const char* s = "Hello";
    printf("\t.%10s.\n\t.%-10s.\n\t.%*s.\n", s, s, 10, s
 
    printf("Characters:\t%c %%\n", 65
 
    printf("Integers\n"
    printf("Decimal:\t%i %d %.6i %i %.0i %+i %u\n", 1, 2, 3, 0, 0, 4, -1
    printf("Hexadecimal:\t%x %x %X %#x\n", 5, 10, 10, 6
    printf("Octal:\t%o %#o %#o\n", 10, 10, 4
 
    printf("Floating point\n"
    printf("Rounding:\t%f %.0f %.32f\n", 1.5, 1.5, 1.3
    printf("Padding:\t%05.2f %.2f %5.2f\n", 1.5, 1.5, 1.5
    printf("Scientific:\t%E %e\n", 1.5, 1.5
    printf("Hexadecimal:\t%a %A\n", 1.5, 1.5
}

输出：

Strings:
    .     Hello.
    .Hello     .
    .     Hello.
Characters:     A %
Integers
Decimal:        1 2 000003 0  +4 4294967295
Hexadecimal:    5 a A 0x6
Octal:          12 012 04
Floating point
Rounding:       1.500000 2 1.30000000000000004440892098500626
Padding:        01.50 1.50  1.50
Scientific:     1.500000E+00 1.500000e+00
Hexadecimal:    0x1.8p+0 0X1.8P+0

参考

C11标准（ISO / IEC 9899：2011）：